Frequently asked questions about PuriFi

PuriFi Labs validates product efficacy by replicating real-world test environments under real-world HVAC mechanical conditions to ensure products are installed and tested the same way they will be used.

When a change in your indoor air quality is detected, the PuriFi Sensor notifies the PuriFi Smart Hub, and the patented PuriFi Generator is signaled to respond—all in real-time.

The PuriFi App gives you a choice of how you want to operate your system:  Clean, Cleaner or Cleanest.  90% of homes and buildings have the best results with the Clean setting. However, during seasonal events, particulates may rise and the Cleaner or Cleanest setting should be utilized for best results.

The PuriFi PM Sensor continuously monitors the air quality in your indoor environment, providing real-time feedback to the Smart Hub or your own smart device. The sensor measures particulates (down to 0.3 micron), temperature and humidity. Simply plug-in the sensor and place it in the area you see the most activity.

The PuriFi app allows you to see your minute-by-minute indoor air quality and control your system from any smartphone or tablet. You can also receive notifications and alerts, such as when to change your HVAC filter.

The PuriFi Generator removes unwanted ozone by means of the proprietary PuriFi 0₂ Catalyst, converting ozone to oxygen. The Catalyst captures ozone molecules while allowing the ions to pass through. This gives you the powerful effect of air purification without the negative side effect of ozone. The system has been tested and proven safe by Underwriters Laboratories (UL).

No. UV can protect your coils and HVAC system but lacks efficacy in high-speed airflow in the duct due to the lack of reaction time to effectively eliminate contaminants. With our Airborne Molecular Purification (AMP) technology and through your HVAC system’s airflow, you blanket every room with natural, long-life, high-energy, molecular ions attacking the contaminants at the source. Every vent in your home or business becomes its own air purification system.

No. Our system runs on a private Zigbee radio network. WIFI is only needed if you want to utilize the detailed data the system provides.

The system uses the highest amount of energy to create strong ion-clusters to remove contaminants and pathogens from every corner of your home but consumes less electricity than a 20w light bulb.

The 8.5” W x 7.3” H x 14” D in-duct unit installs into the existing air duct path on the supply side of your central HVAC system. It connects to your blower fan only.

Most installations take approximately 20 minutes for the Generator and another 10 – 15 minutes for the PM Sensor and the Smart Hub.

Simple. You only need to replace the PuriFi 0₂ Catalyst every two years. A notification reminder will be sent to you when it’s time to replace.

Yes, you will want to change your HVAC air filter more often as needed since our natural ionization process will make your air filters more effective.

Depending on the size of your home or business, you may have more than one HVAC system. Since this patented air purification technology uses the airflow from your HVAC fan, your application may require additional units. Each HVAC system will need one PuriFi system. For example, if your home or business has two HVAC systems, then you will need two units. If your home or business has one HVAC system, then you will need one unit. A PuriFi Generator installed in each Air Handling Unit (AHU) ensures the entire occupied space is being purified. Contact 1-602-253-2624 for more information on a multiple-unit installation.

The system is covered by a Limited Warranty: Generator (5-Year Limited), Sensor (2-Year Limited), and Hub (2-Year Limited).

No. It integrates into your duct work and therefore does not affect your HVAC system.